UNunnums
2788

UN 2788Organotin compounds, liquid, n.o.s.

Division 6.1

Toxic substances

Summary

UN 2788 is the UN number for organotin compounds, liquid, n.o.s. It is classed in Division 6.1 (toxic substances) of Class 6 for transport. Packing group I, II or III, depending on the form. Emergency responders use ERG guide 153.

Emergency response

The Emergency Response Guidebook (ERG2024) guide for this number:

  • Guide153Organotin compound, liquid, n.o.s.

From the 2024 Emergency Response Guidebook (ERG2024), published by U.S. Department of Transportation, PHMSA. Read the full guide in the ERG or on CAMEO Chemicals.

Identification

UN number
UN 2788
Name
Organotin compounds, liquid, n.o.s.
Division
6.1: Toxic substances
Packing group
I, II, III
What the class covers
Substances liable to cause death, serious injury or harm to health if swallowed, inhaled or absorbed through the skin.

U.S. Hazardous Materials Table

3 entries share this number in 49 CFR 172.101, by name, packing group or where the shipment is going.

  • UN2788Organotin compounds, liquid, n.o.s

    Special provisions: N33, N34, T14, TP2, TP13, TP27

    Class
    6.1
    Packing group
    I
    Labels
    6.1
  • UN2788Organotin compounds, liquid, n.o.s

    Special provisions: A3, IB2, N33, N34, T11, TP2, TP13, TP27

    Class
    6.1
    Packing group
    II
    Labels
    6.1
  • UN2788Organotin compounds, liquid, n.o.s

    Special provisions: IB3, T7, TP2, TP28

    Class
    6.1
    Packing group
    III
    Labels
    6.1

From the eCFR edition of 49 CFR 172.101 dated 2026-10-05 (section last amended 2026-09-08). The eCFR is an editorial compilation, not the official legal edition. Read the current table.

About Class 6

Class 6 covers poisons and infectious material. Division 6.1 is toxic substances that harm people if swallowed, inhaled or absorbed through the skin; 6.2 is infectious substances such as cultures and medical waste.

See all Class 6 UN numbers

Check the official sources

For emergency response, packaging and quantity limits, use these: